PCICASE GROUP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Home | Hot Products | About Us | Contact Us | FAQ | Downloads
   
Products


Image for display purposes only
Click here to see enlarged view

Model: IPC C2R 2U Chassis

IPC C2R chassis is designed for entry-level Servers and Host applications. Dual 5.25" bays provide flexibilities to upgrade the chassis with Hot-Swap canisters or CD-ROM or FDD drive. It supports a full range of processors from PIII to dual Xeon.
Specifications

Model: IPC C2R
Industry Standard: EIA-RS310D
Materials: Heavy-duty cold-rolled steel
Finish: Inside / Body: Zinc-plated with bright chromate
Outside / Front Panel : Texture-coated
Dimensions
(W × D × H)
mm: 482.6 × 685.8 × 88.8
inches: 19 × 27 × 3.5
Cooling: Middle: 2 × 80x25mm fans + 1 × 40 × 28mm fans (optional 4 × 40 × 28mm upgrade - order as module)
Rear: 1 × 80 × 25mm fan
Power Supply: PS2 power supply(8cm fan version)
Expansion: 3 × PCI slots via riser card (full height, full length) or
7 × low profile PCI slots
Controls: Power on/off, system reset and 2 × USB ports
Indicators: Power, LAN and HDD LEDs
System Board: Up to 12”(W) × 13”(D) E-ATX/SSI EEB 3.6 compliant MB
Drive Bay: External 5.25" 2
3.5" 1
Internal 3.5" HDD 4
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Gross Weight: 16kgs / 35.2lbs (w/o PSU & Rail)
Package Dimension:   (W × D × H) mm: 588 × 852 × 259
Riser Card Riser Cards
Mounting Options: CLM-882054B-26: 26" Sliding Rails + Brackets
Backplane Module Options SNT-1041SS: 4×2.5" SAS & SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-1060SATA: 6×2.5" SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-2131SS: 3×2.5/3.5" SAS & SATA HDD/SSD in 2×5.25" Bay, hot swappable.
 
Home |  About Us |  Service |  Warranty |  Legal Disclaimer |  Terms and Conditions  |  Privacy
   
© Copyright 2003. Procase NZ Ltd All Rights Reserved