PCICASE GROUP -- CASES AND STORAGE PROFESSIONAL

Products

Model:	P1A-6300P
Output Wattage:	300W
Dimension:	(D × W × H) 205x100x40.5(mm)

AC Input Spec.

VOLTAGE: 100 ~ 240 VAC
FREQUENCY : 60~ 50 HZ
INPUT CURRENT: 6.0 A ( RMS ) FOR 115VAC
3.0 A ( RMS ) FOR 230VAC
INRUSH CURRENT: 60.0A MAX. FOR 115 VAC; 80.0A MAX. FOR 230 VAC

DC Output Spec.

Output Voltage	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
5V	3	24	± 5%	± 1%	80mV
12V	2	20	± 8%	± 1%	120mV
-5V	0	0.5	±10%	± 1%	150mV
-12V	0	0.5	±10%	± 1%	150mV
3.3V	1	20	± 5%	± 1%	80mV
+5VSB	0.1	1.5	± 5%	± 1%	80mV

REMARKS:
1. THE OUTPUT POWER OF 5V & 3.3V NOT EXCEED 170 WATTS
2. THE OUTPUT POWER OF 5V, 3.3V AND 12V NOT EXCEED 284W
3. TOTAL OUTPUT POWER NOT EXCEED 300 WATTS

Features

*Active PFC (full range), MEET IEC-1000-3-2 CLASS D
*12V Max. Current : 20A
*TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃.
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
*EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
*OVER POWER PROTECTION
*OVER VOLTAGE PROTECTION
*OVER CURRENT PROTECTION
*SHORT CIRCUIT PROTECTION
*SAFETY: UL, CSA, TUV, CCC, GOST
*Remote on/off control
*Cooling: ONE 40 mm DC Fan
*3.3V /5V Remote sensing
*Extend AC cable ( optional )
*Serial ATA optional

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

Connector Configuration
Connector	20 + 4 pin ATX main power cable	4 pin ATX plus 12 volt power cable	Floppy drive power cable	4 pin peripheral power cable
Quantity	1	1	2	4

Content on this page requires a newer version of Adobe Flash Player.