Form Factor |
Mini-ITX (170 millimeters [6.7 inches] x 170 millimeters [6.7 inches]) |
Processor Chipset |
Intel Bay Trail J1900 Processor with integrated graphics (*Remark: Compatible with J1800 and J2900) |
Memory |
Support for dual channel DDR3L 1333/1600 SO-DIMMs |
Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM) |
204-pin DDR3L SO-DIMM |
2 |
Integrated Graphics |
Intel HD graphics and DriectX 11 support |
Integrated graphics: |
Digital displays (DVI-I) |
Analog displays (VGA) |
Flat Panel displays (LVDS interface) |
External Graphics |
External graphics support via a PCI Express 1.0a x1 graphics add-in card connector |
Audio |
RealTek* ALC662 audio codec for 5.1 (6-channel) High Definition Audio (HD Audio) and AC ’97 Audio. Included are: |
Back panel audio connectors |
Onboard S/PDIF digital audio header |
Front panel microphone/headphone header with support for HD Audio or AC ’97 Audio |
Legacy I/O |
Legacy I/O Controller (Nuvoton NCT 6104D) that provides: |
Hardware management support |
Serial Port (Rear IO) |
2 |
Serial Port (On board) |
2 |
Parallel port via an onboard header |
1 |
Expansion Capability |
PCI-e X1 bus add-in card connector |
1 |
PCI Express* Full-Mini Card slot with Half-Mini Card support |
1 |
Peripheral Interfaces |
USB 2.0 back panel connectors (black) |
2 |
USB 3.0 back panel connectors (blue) |
2 |
USB 2.0 front panel ports |
2 (Headers) |
Intel®Z-U130 USB Solid-State Drive or compatible device |
1 (Header) |
Serial ATA (SATA) 3.0 Gb/s interfaces |
2 |
Hardware Monitor Subsystem |
Hardware monitoring through the Nuvoton NCT 6104D legacy I/O controller, including: |
Remote thermal sensor |
3-pin system fan header with speed control |
LAN Support |
Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs |
BIOS |
Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS |
Instantly Available PC Technology |
Support for Advanced Configuration and Power Interface (ACPI) |
Wake on peripheral device |
Power Requirement |
ATX12V, SFX12V or DC12V (4-pin) |
Environment |
Operating Temperature: 0 °C to +60 °C |
Storage Temperature: -20°C to +70°C |
Safety |
CE |
FCC |